Products

Ardrox® 5503 is a clear, colorless, mobile solvent cleaner with varying flash points and volatility levels. It complies with MIL-PRF-680 requirements and is designed for general industrial use as a solvent cleaner to remove oils and greases.

Ardrox® 5502 is a clear, colorless, mobile solvent cleaner with varying flash points and volatility levels. It meets MIL-PRF-680 specifications and is designed for general industrial use as a solvent cleaner to remove oils and greases.

Polyquart® Pro A is a moderately hydrophobic surface modification polymer, sold as a clear liquid of concentration 22%. It has better electrolyte tolerance than Polyquart 149 and a wider usage pH range of 1-14. Recommended concentration at use is 0.2-0.45% as supplied. It is approved for non-food use as an inert with the EPA, and can be used in registered cleaning formulations requiring non-food use only.

Dehyton® PK 45 is an amphoteric surfactant that is suitable for universal application in cosmetic and pharmaceutical surfactant preparations. When combined with anionic surfactants, synergistic effects are achieved, resulting in a dermatological improvement of the consumer product. Its application properties are comparable to those of conventional cocamidopropyl betaine types.

Luvipur® FM 85 is a liquid product with a concentration of 85%. It can be utilized as a neutralizer or acidifier and has a high dissolving power on different metal scales. It is fully stable in non-oxidizing formulations and readily biodegradable. It finds applications in cleaning in place and manual dishwashing.

Sokalan® CP 10 is a dispersing ingredient that functions as a performance booster and is available as a fully neutralized version (pH approximately 8.5) in approximately 45% liquid form. This product finds applications in hard surface cleaning, food and beverage processing, food service and kitchen hygiene, commercial laundry, institutional cleaning and sanitation, and vehicle and transportation care.

Ardrox® 188 is an alkaline powder blend containing an oxidizing material, while Ardrox® 188RFU (Ready For Use) is the liquid version of Ardrox® 188 powder. These products are primarily intended to aid in the removal of difficult heat scales, such as those produced on high chromium steels and nickel and cobalt alloys, which are notoriously hard to remove even with strong acids. Ardrox® 188 or Ardrox® 188RFU typically do not remove such scales by themselves but chemically and physically modify them to make them more easily removable by milder and less dangerous methods than using strong acids. The primary application for Ardrox® 188 or Ardrox® 188RFU is in the overhaul of "hot end" components of gas turbine engines.

Ardrox® 1873A is a concentrated liquid mixture containing sequestrants and surfactants, mildly acidic in nature. It has been formulated to effectively descale chrome steels, stainless steels, nickel, and cobalt alloys commonly used in aircraft turbine engines. These alloys often accumulate hard, adherent oxide scale during service, necessitating removal during overhaul to facilitate penetrant inspection processes.

Emulgade® CM is a liquid emulsion concentration for the preparation of creams and lotions. This product is especially suitable for wet wipes. It is easy to handle and is suitable for simple cold processing to achieve low- to medium-viscous O/W emulsions.

Texapon® 842 UP is a highly effective hydrotrope, available as a 40% liquid. It is up to 8 times more efficient than SXS in some systems and has moderate foam that dissipates quickly. It is listed on the Safer Choice list.

Glucopon® 225 DK is a 70% liquid short-chain APG available as a hydrotrope. It provides high foam with good primary cleaning, is unbleached and supplied as a dark liquid, and is 100% derived from renewable resources. It is very mild to the skin and can synergistically reduce the skin irritation caused by anionic surfactants while also providing excellent gloss retention with little to no streaking and excellent plastic compatibility. It is listed on the EPA's Safer Chemical Ingredients List, approved for direct release to the environment, and contains no biocide for preservation.

Plurafac® LF-901 is a nonionic surfactant with low foaming properties. It is made up of predominantly unbranched fatty alcohols that are alkoxylated with both higher alkene oxides and ethylene oxide. This 100% active product provides benefits such as low foaming solutions and wetting capabilities.

Pluronic® F 68 PRILL is a versatile difunctional block copolymer surfactant that terminates in primary hydroxyl groups. As a nonionic surfactant, it is 100% active and has low toxicity. Pluronic® F 68 PRILL offers excellent properties for dispersing various materials, making it suitable for applications requiring emulsion stability, good particle dispersion, foaming, and associative thickening.

Trilon® M Max BioBased L is a methylglycine diacetic acid (MGDA). Trilon® M Max BioBased L represents the newest generation of complexing agents. Based on methylglycine diacetic acid the product provides a very good chelating performance in addition with a readily biodegradability property. The excellent ecological and toxicological profile of Trilon® M Max BioBased L has been verified in various repeated studies.