Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- CASE Ingredients Functions
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Product End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color (Properties)
- Flame Rating
- Mechanical Properties
Value Units Test Method / Conditions Tensile Modulus (Cond.) 6200 MPa ISO 527-1/-2 Tensile Modulus (Dry) 9500 MPa ISO 527-1/-2 Stress at Break (Dry) 3.5 % ISO 527-1/-2 Stress at Break (Cond.) 8 % ISO 527-1/-2 Flexural Modulus (Cond.) 5000 MPa ISO 178 Flexural Modulus (Dry) 8600.0 MPa ISO 178 Flexural Strength (Cond.) 180 MPa ISO 178 Flexural Strength (Dry) 270.0 MPa ISO 178 Charpy Unnotched Impact Strength (at 23°C)(Dry) 95.0 kJ/m² ISO 179/1eU Charpy Unnotched Impact Strength (at 23°C)(Cond.) 110.0 kJ/m² ISO 179/1eU Charpy Unnotched Impact Strength (-30°C) (Dry) 80 kJ/m² ISO 179/1eU Charpy Notched Impact Strength (Dry) (at 23°C) 15 kJ/m² ISO 179/1eA Charpy Notched Impact Strength (Cond.) (at 23°C) 30 kJ/m² ISO 179/1eA Izod Notched Impact Strength (Dry) (at 23°C) 15.5 kJ/m² ISO 180/A Izod Notched Impact Strength (Dry) (at 23°C) 150 J/m ASTM D 256 Izod Notched Impact Strength (Cond.) (at 23°C) 20 kJ/m² ISO 180/A Izod Notched Impact Strength (Cond.) (at 23°C) 300 J/m ASTM D 256 Izod Notched Impact Strength (-30°C) (Dry) 11 kJ/m² ISO 180/A Charpy Notched Impact Strength, MPTS (Dry) (at 23°C) 15 kJ/m² ISO 179/1eA Izod Impact Strength (Dry) (at -30°C) 70 kJ/m² ISO 180/U Izod Impact Strength (Dry) (at 23°C) 80.0 kJ/m² ISO 180/U Charpy Notched Impact Strength (23°C) (Dry) 15 kJ/m² ISO 179/1eA Charpy Notched Impact Strength (23°C) (Cond.) 30 kJ/m² ISO 179/1eA Charpy Notched Impact Strength (Dry) (at -30°C) 11 kJ/m² ISO 179/1eA Charpy Impact Strength, MPTS (Dry) (at 23°C) 95 kJ/m² ISO 179/1eU - Typical Properties
Value Units Test Method / Conditions Polymer Abbreviation (at 23°C) PA6-GF30 - - Density (at 23°C) 1360 kg/m³ ISO 1183 Viscosity Number (0.5% in 96% H₂SO₄) (at 23°C) 140 cm³/g ISO 307, 1157, 1628 Water Absorption (Equilibrium in Water, at 23°C) 6.3 - 6.9 % Similar to ISO 62 Moisture Absorption, Equilibrium (at 23°C/50% r.h) 1.9 - 2.3 % Similar to ISO 63 Halogen content (Cl, Br, I), Schoeniger IC (at 23°C) (3) 50 mg/kg - Bulk Density 0.7 g/cm³ - - Thermal Properties
Value Units Test Method / Conditions Deflection Temperature Under Load 1.8 Mpa (HDT A) 210.0 °C ISO 75-1/-2 Deflection Temperature Under Load 0.45 MPa (HDT B) 220.0 °C ISO 75-1/-2 Service Temperature (Short Cycle Operation) max. 200 °C - Temperature Index at 50% Loss of Tensile Strength after 5000 H 165 °C IEC 60216 Temperature Index (at 50% loss of tensile Strength after 20000 H) 135 °C IEC 60216 Coefficient of Linear Thermal Expansion, Longitudinal (at 23°C - 55°C) 22 E - 6/K ISO 11359-1/-2 Coefficient of Linear Thermal Expansion, Transverse (at 23°C - 55°C) 106 E - 6/K ISO 11359-1/-2 Thermal Conductivity 0.36 W/(m K) DIN 52612-1 Specific Heat Capacity 1500 J/(kg*K) - Relative Permittivity (1 Mhz) (Dry) 3.8 - IEC 62631-2-1 Relative Permittivity (1 Mhz) (Cond.) 6.8 - IEC 62631-2-1 Dissipation Factor (1 MHz) (Cond.) 2200.0×10⁻⁴ IEC 62631-2-1 Dissipation Factor (1 Mhz) (Dry) 230.0×10⁻⁴ IEC 62631-2-1 Volume Resistivity (Cond.) 1×10⁹ Ohm.m IEC 62631-3-1 Volume Resistivity (Dry) 1×10¹² Ohm.m IEC 62631-3-1 Surface Resistivity (Cond.) 1×10⁹ Ohm IEC 62631-3-2 Surface Resistivity (Dry) 1×10¹¹ Ohm IEC 62631-3-2 Electric Strength K20/K20 (Cond.) 35 kV/mm IEC 60243-1 Electric Strength K20/K20 (Dry) 39 kV/mm IEC 60243-1 - Flammability
Value Units Test Method / Conditions Ul94 Flammability Rating (at Nominal 1.5mm) HB (1.57) class (mm) IEC 60695-11-10 Yellow Card available Yes - - Automotive Materials (Thickness > 1mm) ⁵ Passed - ISO 3795, FMVSS 302 - Processing Properties
Value Units Test Method / Conditions Melting Temperature 220 °C ISO 11357-1/-3 /DSC Melt Volume-Flow Rate (275°C/5 Kg) 35.0 cm³/10min ISO 1133 Melt Temperature (Injection Molding/Extrusion) 270 - 290 °C - Mold Temperature (Injection Molding) 80 - 90 °C - Molding Shrinkage (Constrained) ⁴ 0.3 % Molding Shrinkage (Parallel) 0.25 % ISO 294-4 Molding Shrinkage (Normal) 0.7 % ISO 294-4 Pre/Post - Processing, Pre - Drying, Temperature 80 °C - Pre/Post - Processing, Pre - Drying, Time 4 h - Melt Temperature 280 °C - Mold Temperature 80 °C - - Note
- If product name or properties don't state otherwise.
- The asterisk symbol '*' signifies inapplicable properties.
- Products colored in other ways may have increased halogen contents.
- Test box with central gating, dimensions of base (107*47*1,5) mm, processing condition: TM = 280°C, TW = 80°C
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Packaging & Availability
- Packaging Information
Standard packs are bag and bulk container (octagonal IBC=intermediate bulk container made from corrugated board with a liner bag).
Other packaging materials and shipping in road or rail silo wagons are possible by agreement.
Storage & Handling
- Storage Information
The containers should only be opened immediately before processing or drying.
To ensure that the delivered product absorbs as little moisture as possible, the containers should be stored in dry rooms and always carefully closed again after partial quantities have been withdrawn.
In principle, the product can be stored for a long period of time.
Containers stored in cold rooms should be equalized to ambient temperature before opening in order to avoid condensation on the granules.
Regardless of the storage conditions, the product should be pre-dried according to our recommendations and the machine should preferably be loaded using a closed conveyor system.