Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Ingredient Origin
- Cleaning Ingredients Functions
- Technologies
- Product Families
- Producer Product Number
- 30528519
Features & Benefits
- Labeling Claims
- HII Features
- Industrial Additives Features
- Key Attributes
- Good performance for cleaning and foam control.
- It's suitable for high temperature cleaning (greater than 60°C) (Food and beverage processing, institutional cleaning & sanitation, food service and kitchen and hygiene).
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Home Care Applications
- I&I Cleaning Applications
Properties
- Physical Form
- Note
- * Cloud point EN 1890:
- Method A: 1 g of surfactant + 100 g of ditilled water
- Method D: 5 g of surfactant + 45 g of butyldiglycol solution (c = 250 g/l)
- Method E: 5 g of surfactant + 25 g of butyldiglycol solution (c = 250 g/l)
- ** The pH value of Dehypon® LS 54 can decrease during storage, but this does not have any effect on its performance.
- *** Applying Harkins-Jordan correction.
- * Cloud point EN 1890:
- Solubility Data
Solubility of Dehypon® LS 54 (10% at 23°C)
Distilled water clear solution Potable water (2.7 mmol Ca?+-Ions/I) clear solution Caustic soda (5%) insoluble (phase separation)
Hydrochloric acid (5%) clear solution Salt solution (5%) insoluble (phase separation)
Solvent naphtha clear solution Ethanol, Isopropanol clear solution Aromatic hydrocarbons clear solution Viscocity
The relationship between viscosity and temperature is always an important point to consider when Dehypon® [S 54 is stored or shipped. This is shown in the following table (Brookfield LVT):
Temperature (°C) Viscosity (mPa-s)
0 approx. 210 10 approx. 110 20 approx. 70 23 approx. 60 30 approx. 45 40 approx. 30 50 approx. 20 60 <20 We would recommend the preparation of 10 - 25% stock solutions of Dehypon® LS 54 if it is to be used in the form of very dilute solutions, or if it is to be added to other solutions. This makes it very much easier to dilute it later on. Dehypon® LS 54 is not likely to form fairly stiff gels at certain concentrations when water is added.
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety Conditions
We know of no ill effects that could have resulted from using Dehypon® LS 54 for the purpose for which it is intended and from processing it in accordance with current practices. According to the experience that we have gained over many years and other information at our disposal, Dehypon® LS 54 does not exert harmful effects on health, provided it is used properly, due attention is given to the precautions necessary for handling chemicals, and the information and advice given in our Safety Data Sheets are observed.
Packaging & Availability
- Country Availability
- Packaging Type
- Packaging Information
- 190KG Steel drums
- 900KG Composite IBC
- Bulk
Storage & Handling
- Storage Condition
- Dehypon® LS 54 should be stored indoors in a dry place. Storage rooms must not be overheated.
- Dehypon® LS 54 is hygroscopic due to its good solubility in water, with the result that it may absorb moisture very quickly. Drums must be resealed each time they are opened.
- Dehypon® LS 54 is a clear to cloudy liquid and tends to form sediment.
- Liquid that has solidified or that shows signs of sedimentation should be heated to 30 - 50°C and homogenized before it is processed. Please mix sufficiently prior to use.
- Drums that have solidified or that have begun to precipitate should be reconstituted by gentle heating, preferably in a heating cabinet. The temperature must not be allowed to exceed 50°C. Please mix sufficiently prior to use. This also applies if drums are heated by external electrical elements. Internal electrical elements should not be used because of the localized anomalies in temperature that they cause.
- Dehypon® LS 54 must be blanketed with nitrogen if it is stored in heated tanks (at 30 - 40°C) to prevent it from coming into contact with air. Constant, gentle stirring helps to prevent it being discolored as a result of prolonged contact with electrical elements or external heating coils.
- Please refer to the latest Safety Data Sheet for detailed information on pro- duct safety.
Materials
The following materials can be used for tanks and drums:
a) Stainless steel 1.4541 - AISI 321 stainless steel (X6 CrNiTi 1810)
b) Stainless steel 1.4571 - AISI 316 Ti stainless steel (X6 CrNiMoTi 17122)
Shelf Life
Provided it is stored properly and drums are kept tightly sealed, Dehypon® LS 54 has a shelf life of at least two years in its original packaging.