Enhanced TDS
Identification & Functionality
- Chemical Family
- Ingredient Origin
- Cleaning Ingredients Functions
- Industrial Additives Functions
- Technologies
- Product Families
- Producer Product Number
- 30528622
Features & Benefits
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
Properties
- Physical Form
- Solubility & Viscosity Data
Details on the solubility of Dehypon® LS 24 in various solvents are given in the table below:
Solubility of Dehypon® LS 24 (10% at 23°C) Distilled water insoluble (phase separation) Potable water (2.7 mmol Ca2+-Ions/I) insoluble (phase separation) Caustic soda (5%) insoluble (phase separation) Hydrochloric acid (5%) insoluble (phase separation) Salt solution (5%) insoluble (phase separation) Solvent naphtha clear solution Ethanol, Isopropanol clear solution Aromatic hydrocarbons clear solution Viscocity:
The relationship between viscosity and temperature is always an important point to consider when Dehypon® LS 24 is stored or shipped. This is shown in the following table (Brookfield LVT):
Temperature (°C) Viscosity (mPa-s ) 0 approx. 130 10 approx. 80 20 approx. 50 23 approx. 45 30 approx. 30 40 approx. 20 50 <20 60 <20 - Note
- The above information is correct at the time of going to press. It does not necessarily form part of the product specification. A detailed product specification is available from your local BAS representative.
- * Cloud point EN 1890:
- Method A: 1 g of surfactant + 100 g of ditilled water
- Method D: 5 g of surfactant + 45 g of butyldiglycol solution (c = 250 g/I)
- Method E: 5 g of surfactant + 25 g of butyldiglycol solution (c = 250 g/I)
- ** The pH value of Dehypon® LS 36 can decrease during storage, but this does not have any effect on its performance.
- *** Applying Harkins-Jordan correction.
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Safety & Health
- Safety Conditions
We know of no ill effects that could have resulted from using Dehypon® LS 36 for the purpose for which it is intended and from processing it in accordance with current practices. According to the experience that we have gained over many years and other information at our disposal, Dehypon® LS 36 does not exert harmful effects on health, provided it is used properly, due attention is given to the precautions necessary for handling chemicals, and the information and advice given in our Safety Data Sheets are observed.
Packaging & Availability
- Country Availability
- Packaging Type
- Packaging Information
- 180KG Steel drums
- 900KG Composite IBC
Storage & Handling
- Storage Condition
a) Dehypon® 36 should be stored indoors in a dry place. Storage rooms must not be overheated.
b) Dehypon® LS 36 is hygroscopic due to its good solubility in water, with the result that it may absorb moisture very quickly. Drums must be resealed each time they are opened.
c) Dehypon® LS 36 is a clear to cloudy liquid and tends to form sediment.
d) Liquid that has solidified or that shows signs of sedimentation should be heated to 30 - 50°C and homogenized before it is processed. Please mix sufficiently prior to use.
e) Drums that have solidified or that have begun to precipitate should be reconstituted by gentle heating, preferably in a heating cabinet. The temperature must not be allowed to exceed 50°C. Please mix sufficiently prior to use. This also applies if drums are heated by external electrical elements. Internal electrical elements should not be used because of the localized anomalies in temperature that they cause.
f) Dehypon® LS 36 must be blanketed with nitrogen if it is stored in heated tanks (at 30 - 40°C) to prevent it from coming into contact with air. Constant, gentle stirring helps to prevent it being discolored as a result of prolonged contact with electrical elements or external heating coils.
Materials: The following materials can be used for tanks and drums: a) AISI 321 stainless steel (X6CrNiTi1810) b) AISI 316 Ti stainless steel (X6CrNiMoTi17122) Provided it is stored properly and drums are kept tightly sealed,
Shelf life: Dehypon® LS 36 has a shelf life of at least two years in its original packaging