Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
Ardrox® 996PB is a low viscosity liquid penetrant with optimized wetting properties to ensure optimum coverage of the part. Its dark red color allows easy control and monitoring of the washing process. The product offers the highest sensitivity level according to EN ISO 3452.
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Uses
It is used together with the Ardrox® range of cleaners and developers.
- Method of Use
Ardrox® 996PB may be applied by aerosol, brushing, flow-on, immersion, spray or by swab.
Pre-Cleaning
Clean part with e.g. Ardrox® 9PR5, 9PR50 or 9PR88 before applying Ardrox® 996PB penetrant. Apply cleaner to the part and wipe clean with cloth. Surface has to be free of grease, oil and dirt. Allow part to dry before applying penetrant.
Penetrant Application
Surface temperature should be between 10 and 50°C (50-120°F). Apply a thin even film of Ardrox® 996PB penetrant to cover test area. Allow penetrant 10–30 minutes penetration time before removing.
Penetrant Removal
Remove excess surface penetrant with clean cloths, pre-moistened with cleaner (e.g. Ardrox® 9PR5, 9PR50 or 9PR88). Do not flush surface with cleaner as sensitivity will be impaired. Repeat procedure until surface penetrant has been removed. Thoroughly dry the component surface before developer application.
Developer
Shake developer (e.g. Ardrox® NQ1) thoroughly. Spray thin, even developer film over area to be inspected (spraying distance 30 cm / 1 ft.). Allow 10 – 30 minutes developing time before evaluation. Inspection should take place in diffused white light of at least 500 lux at the component surface.
Cleaning
After final inspection, components can be cleaned using e.g. Ardrox® 9PR5, 9PR50 or 9PR88.
Note: the procedure above is a recommendation only; where relevant, the process specifications of the approving authorities must be followed.
- Effects on Materials
When Ardrox® 996PB is used in the prescribed manner, no significant corrosion is likely to occur on commonly used constructional metals. The product may stain or soften some plastics and rubbers and, where appropriate, a compatibility test should be carried out.
Properties
- Color (Properties)
- Appearance
- Dark Red, Mobile Liquid
- Physico-Chemical Properties
Value Units Test Method / Conditions Density (at 20°C/68°F) approx. 0,90 g/ml - Flash Point min. 93 (201) °C (°F) -
Regulatory & Compliance
- OEM Specifications
Packaging & Availability
- Country Availability
- Packaging
Ardrox® 996PB is available as bulk material and as aerosol cans.