Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color (Properties)
- Mechanical Properties
Value Units Test Method / Conditions Tensile Modulus (Dry) 5800 MPa ISO 527-1/-2 Stress at Break (Dry) 130 MPa ISO 527-1/-2 Strain at Break (Dry) 3.5 % ISO 527-1/-2 Flexural Modulus (Dry) 5300.0 MPa ISO 178 Flexural Strength (Dry) 200.0 MPa ISO 178 Charpy Unnotched Impact Strength (Dry) (at -30°C) 45 kJ/m² ISO 179/1eU Charpy Unnotched Impact Strength (23°C) (Dry) 50 kJ/m² ISO 179/1eU Charpy Notched Impact Strength (Dry) (at -30°C) 5 kJ/m² ISO 179/1eA Charpy Notched Impact Strength (23°C) (Dry) 6 kJ/m² ISO 179/1eA - Typical Properties
Value Units Test Method / Conditions Polymer Abbreviation (at 23°C) PA6-GF15 - - Density (at 23°C) 1230 kg/m³ ISO 1183 Water Absorption (Equilibrium in Water, at 23°C) 8 % Similar to ISO 92 Moisture Absorption, Equilibrium (at 23°C/50% r.h) 2.6 % Similar to ISO 93 Bulk Density 0.7 g/cm³ - - Thermal Properties
Value Units Test Method / Conditions Deflection Temperature Under Load 1.8 Mpa (HDT A) 195.0 °C ISO 75-1/-2 - Electrical Properties
Value Units Test Method / Conditions Volume Resistivity (Dry) min. 1×10²⁴ Ohm.m IEC 62631-3-1 - Total Amino Acid Profile
Value Units Test Method / Conditions Deflection Temperature Under Load 0.45 MPa (HDT B) 218 °C ISO 75-1/-2 - Processing Properties
Value Units Test Method / Conditions Melt Volume-Flow Rate (275°C/5 Kg) 65.0 cm³/10min ISO 1133 Melt Temperature (Injection Molding/Extrusion) 250 - 270 °C - Mold Temperature (Injection Molding) 80 - 90 °C - Molding Shrinkage (Constrained) ³ 0.45 % - Note
- If product name or properties don't state otherwise.
- The asterisk symbol '*' signifies inapplicable properties.
- Test box with central gating, dimensions of base (107*47*1,5) mm, processing condition: TM = 280°C, TW = 80°C
- Note
- If product name or properties don't state otherwise.
- The asterisk symbol '*' signifies inapplicable properties.
- Test box with central gating, dimensions of base (107*47*1,5) mm, processing condition: TM = 280°C, TW = 80°C
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Safety & Health
- Product Safety
In case processing is done under conditions as recommended (cf. processing data sheet) melts are thermally stable and do not generate hazards by molecular degradation or the evolution of gases and vapors.
Like all thermoplastic polymers the product decomposes on exposure to excessive thermal load, e.g. when it is overheated or as a result of cleaning by burning off.
- Product Safety
In case processing is done under conditions as recommended (cf. processing data sheet) melts are thermally stable and do not generate hazards by molecular degradation or the evolution of gases and vapors.
Like all thermoplastic polymers the product decomposes on exposure to excessive thermal load, e.g. when it is overheated or as a result of cleaning by burning off.
Packaging & Availability
- Packaging Information
Standard packs are bag and bulk container (octagonal IBC=intermediate bulk container made from corrugated board with a liner bag).
Other packaging materials and shipping in road or rail silo wagons are possible by agreement.
The containers should only be opened immediately before processing or drying.
- Packaging Information
Standard packs are bag and bulk container (octagonal IBC=intermediate bulk container made from corrugated board with a liner bag).
Other packaging materials and shipping in road or rail silo wagons are possible by agreement.
Storage & Handling
- Storage Information
The containers should only be opened immediately before processing or drying.
To ensure that the delivered product absorbs as little moisture as possible, the
containers should be stored in dry rooms and always carefully closed again after partial quantities have been withdrawn.In principle, the product can be stored for a long period of time.
Containers stored in cold rooms should be equalized to ambient temperature before opening in order to avoid condensation on the granules.
Regardless of the storage conditions, the product should be pre-dried according to our recommendations and the machine should preferably be loaded using a closed conveyor system.