Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color (Properties)
- Mechanical Properties
Value Units Test Method / Conditions Tensile Modulus (Dry) 11800 MPa ISO 527-1/-2 Stress at Break (Dry) 200 MPa ISO 527-1/-2 Strain at Break (Dry) 2.7 % ISO 527-1/-2 Charpy Notched Impact Strength (Dry) (at 23°C) 8.5 kJ/m² ISO 179/1eA Charpy Unnotched Impact Strength (Dry) (at 23°C) 75 kJ/m² ISO 179/1eU Flexural Strength (Dry) 285 MPa ISO 178 - Typical Properties
Value Units Test Method / Conditions Polymer Abbreviation (at 23°C) PA66 - GF35 - - Density (at 23°C) 1410 kg/m³ ISO 1183 Viscosity Number (0.5% in 96% H₂SO₄) (at 23°C) 145 cm³/g ISO 307, 1157, 1628 Moisture Absorption, (Equilibrium at 23°C/50% r.h) 1.4 - 1.8 % similar to ISO 62 Water Absorption (Equilibrium in Water, at 23°C) 4.7 - 5.3 % similar to ISO 62 Bulk Density (at 23 °C ) approx. 0.7 g/cm³ - Thermal Properties
Value Units Test Method / Conditions Deflection Temp. Under Load 1.8 Mpa (Hdt A) 250 °C ISO 75-1/-2 Deflection Temp. Under Load 0.45 MPa (HDT B) 250 °C ISO 75-1/-2 - Processing Properties
Value Units Test Method / Conditions Melting Temperature 260.0 °C ISO 11357-1/-3,DSC Melt Volume-Flow Rate at 275°C/5 kg 30.0 cm³/10min ISO 1133 Melt Temperature (Injection Molding/Extrusion) 280 - 300 °C - Mold Temperature (Injection Molding) 80 - 90 °C - Molding Shrinkage (Parallel) 0.37 % ISO 294-4 Molding Shrinkage (Normal) 1.04 % ISO 294-4
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Safety & Health
- Product Safety
In case processing is done under conditions as recommended (cf. processing data sheet) melts are thermally stable and do not generate hazards by molecular degradation or the evolution of gases and vapors. Like all thermoplastic polymers the product decomposes on exposure to excessive thermal load, e.g. when it is overheated or as a result of cleaning by
burning off.
Packaging & Availability
- Packaging Information
. Standard packs are bag and bulk container (octagonal IBC=intermediate bulk container made from corrugated board with a liner bag). Other packaging materials and shipping in road or rail silo wagons are possible by agreement.
Storage & Handling
- Storage Information
To ensure that the delivered product absorbs as little moisture as possible, the containers should be stored in dry rooms and always carefully closed again after partial quantities have been withdrawn. In principle, the product can be stored for a long period of time. Containers stored in cold rooms should be equalized to ambient temperature before opening in order to avoid condensation on the granules. Regardless of the storage conditions, the product should be pre-dried according to our recommendations and the machine should preferably be loaded using a closed conveyor system.