Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color (Properties)
- Mechanical Properties
Value Units Test Method / Conditions Tensile Modulus 9800.0 MPa ISO 527-1/-2 Stress at Break 100.0 MPa ISO 527-1/-2 Strain at Break 2.3 % ISO 527-1/-2 Flexural Modulus 10000.0 MPa ISO 178 Flexural Strength 180.0 MPa ISO 178 Charpy Unnotched Impact Strength (at 23°C) 45 kJ/m² ISO 179/1eU Charpy Unnotched Impact Strength (at -30°C) 47 kJ/m² ISO 179/1eU Charpy Notched Impact Strength (at 23°C) 7.0 kJ/m² ISO 179/1eA - Typical Properties
Value Units Test Method / Conditions Polymer Abbreviation PBT-GF25 FR(40+30) - - Density 1530 kg/m³ ISO 1183 Viscosity Number (Solution 0,005 g/ml Phenole/1,2 Dichlorbenzol 1:1) 105 cm³/g ISO 307, 1157, 1628 Water Absorption (Equilibrium in Water, at 23°C) 0.4 % similar to ISO 62 Moisture Absorption, Equilibrium (at 23°C/50% r.h) 0.2 % similar to ISO 62 Bulk Density 0.7 - 0.8 g/cm³ - - Thermal Properties
Value Units Test Method / Conditions Deflection Temperature 1.8 (HDT A) 210.0 °C ISO 75-1/-2 Deflection Temperature Under Load 0.45 MPa (HDT B) 220.0 °C ISO 75-1/-2 Coefficient of Linear Thermal Expansion, Longitudinal (at 23°C - 55°C) 35.0 x 10⁻⁶ /K ISO 11359-1/-2 Coefficient of Linear Thermal Expansion, Transverse (at 23°C - 55°C) 118.0 x 10⁻⁶ /K ISO 11359-1/-2 - Electrical Properties
Value Units Test Method / Conditions Relative Permittivity (1 MHz) 3.6 - IEC 62631-2-1 Dissipation Factor (1 MHz) 137.0 x 10⁻⁴ IEC 62631-2-1 Volume Resistivity 1×10¹³ Ohm.m IEC 62631-3-1 Surface Resistivity 1×10 ¹⁴ Ohm IEC 62631-3-2 Comparative Tracking Index - CTI (Solution A) 525 - IEC 60112 - Shrinkage
Value Units Test Method / Conditions Molding Shrinkage (Parallel) 0.44 % ISO 294-4 Molding Shrinkage (Normal) 1.24 % ISO 294-4 - Flammability
Value Units Test Method / Conditions Glow Wire Flammability Index - GWFI (Thickness) 960 (1) °C (mm) IEC 60695-2-12 Glow Wire Ignition Temperature - GWIT (Thickness) 775 (1) °C (mm) IEC 60695-2-13 - Injection Molding
Value Units Test Method / Conditions Melt Temperature (Range) 260 - 280 °C Mold Temperature (Range) 60 - 100 °C - Residence Time max. 5 min - - Drying
Value Units Test Method / Conditions Moisture Content max. 0.04 % - Dryer Temperature ³ 80 - 120 °C Drying Time 4 h - - Machine Settings
Value Units Test Method / Conditions Temperature Hopper Throat 80 °C - Cylinder Temperature 1 (Feed Zone) 260 °C - Cylinder Temperature 2 (Compression) 265 °C - Cylinder Temperature 3 (Metering - Zone, in Front of The Screw) 270 - - Cylinder Temperature 4 (Nozzle) 270 °C - Peripheral Screw Speed max. 0.25 m/s - - Processing Properties
Value Units Test Method / Conditions Melting Temperature 223.0 °C ISO 11357-1/-3, DSC Melt Volume flow Rate(275°C/2.16 kg) 15.0 cm³/10min ISO 1133 Mould Temperature (Injection Moulding) 60 - 100 °C - Molding Shrinkage (Model-Housing 1.5 mm) 0.5 % - - Note
1. If product name or properties don't state otherwise.
2. The asterisk symbol '*' signifies inapplicable properties.
3. Dry air dryer or vacuum dry
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Safety & Health
- Product Safety
Ultradur® melts are stable at temperatures up to 280°C and do not give rise to hazards due to molecular degradation or the evolution of gases and vapors.
Like all thermoplastic polymers, however, Ultradur decomposes on exposure to excessive thermal stresses, e.g. when it is overheated or as a result of cleaning by burning off. At temperatures of > 290°C can be emitted: carbon monoxide, tetrahydrofuran.Under special fire conditions traces of other toxic substances are possible.
Formation of further decomposition and oxidation products depends upon the fire conditions. When Ultradur® is properly processed and there is adequate suction at the die no risks to health are to be expected.Further safety information see safety data sheet of individual product.
Packaging & Availability
- Packaging Conditions
Standard packaging includes the 25-kg-bag, the 1000 kg octabin (octagonal container) or the 1000 kg big bag.
All containers are tightly sealed and should be opened only immediately prior to processing.
Storage & Handling
- Storage Conditions
Ultradur® can be stored for a longer period of time in dry, well vented rooms without causingproblems in processing.
Ultradur® should generally have a moisture content of less than 0,04% when being processed.
In order to ensure reliable production, therefore, pre-drying should generally be the rule and the machine should be loaded via a closed conveyor system.
In order to prevent the formation of condensed water, containers stored in unheated rooms must only be opened when they have attained the temperature prevailing in the processing area.
Measurements have shown that the interior of a 25-kg bag originally at 5°C had reached the temperature of 20°C in the processing area only after 48 hours.